A brief demonstration of sending and receiving data using the Melody Classic Application on an iOS device with BC127.
A brief demonstration of the toggle VR functionality using BC127 on an iOS and Android device.
A brief demo showing the new dual A2DP feature using BC127 with the latest Melody firmware.
A demo of how to configure and play audio using the aptX-HD codec on the BC127-HD discovery board.
A demo of the high performance of BC127 using True Wireless and the delay measurement using Picoscope Oscilloscope.
Melody Audio Proximity demo using two BC127 Development Kits and an iOS device.
Since the BC127 can transfer data over IAP at high speeds, we did a demo showing Audio being transfered from the BC127 to the iPhone using the IAP data link which we thought was quite cool. The Audio is uncompressed 16Khz/16bit in this example. The Wave file is sent to the UART of the BC127 which then sends it via Bluetooth to the iPhone.
A video demonstrating supported beacons for MelodySmart using BC118. Demonstrates support for iBeacon, Eddystone UID and Eddystone URL.
A demonstration showing the high speed throughput over iAP2 using a BC127 module. A speed of about 740kbit/s is achieved from the BC127 to the iOS device and a speed of about 550kbit/s is achieved from the iOS device to the BC127.
A brief demonstration showing I2S setup and testing using a BC127 Development Board running Melody and Texas Instruments TLV320AIC33 EVM Board.
A demonstration showing the latest update of BC Mesh 1.1.3 running on BC118 and Android.
A brief demonstration of audio routing using BC127 in Melody 5.7 RC7.
A demonstration showing remote commands from central to peripheral modes on BC118. Also a demo on how to use GPIO mirroring on BC118.
A brief demonstration showing the GPIO functionality of MelodySmart 3.4 on BC118 using remote commands on iOS.
A brief demonstration showing how to connect and communicate between two BC118 BLE modules using central/peripheral mode.
A brief demonstration explaining and showing how to send remote commands over BLE using BC127.
Demo showing how to send commands over USB using the BC127 module.
Demonstration video explaining how to create a mutli connection between two Bluetooth enabled smartphones and one BC127 module.
BC118 Demo of how to use Remote Commands over BLE on MelodySmart using an iOS device.
Demo showing how to use I2C over BLE using the MelodySmart firmware on an Android Smartphone.
Demonstration showing how to connect and use MiniStak HID using a Bluetooth enabled keyboard.
Demonstration showing how to connect and use MiniStak HFP. Instruction on how to make and receive telephone calls via a smartphone using MiniStak HFP.
Demonstration of how to connect and use MiniStak over SPP with an Android smartphone running Melody Android.
BlueCreation Guide: How to connect the BC118 module to an Android device using MelodySmart on the BLE Explorer App.
Demo of how to create a network of BC118 modules using Mesh on Android.
Demo showing how to update your BC Mesh firmware on BC118 through the MelodySmart app on iOS
This demo shows how to upgrade Bluetooth module BC118 with MelodySmart OTA using an Android Smartphone.
The 'Blue Creation BLE Explorer' App is available to download from Google Play Store.
This tutorial shows how to upgrade Bluetooth module BC118 using MelodySmart OTA on iOS.
This Demo is to show how to connect a BC118 to an iOS device and receive and send Data. The iOS App used is the Melody Android Sample App and is available for purchase.
This Demo is to show how to connect a BC118 to an Android device and receive and send Data. The Android App used is the Melody Android Sample App and is available for purchase.
This demo shows how to connect a BC127 as a keyboard to a keyboard or any HID device to a BC127 module and receive HID reports. Note that HID works simultaniously with all other BC127 functionality (Multi-connection, Audio, Bluetooth Low energy).
This is a demo of the Mesh technology. The video shows how a Mesh netweork is set-up and how one node cand send messages to other nodes.
This demo shows how to connect a keyboard or any HID device to a BC127 module and receive HID reports. Note that HID works simultaniously with all other BC127 functionality (Multi-connection, Audio, Bluetooth Low energy).
This demo is to show the BC127 behaving as an iBeacon. this feature works with all the other features simultaneously such as music, call and Phone book access.
This video quality is poor but this is a tutorial to show how multi-connection works and one can switch from one phone call to another using the HFP connection.
This demo is to show how to switch Audio streams between multiple connected devices. So one can chose which Audio to play from the module.
This short video is to help developers using Melody 5.2 and above to set-up a wireless connection between BC127-DEVKIT or BC127-DISKIT. It shows which UART configurations and commands to use.
This demo shows MiniStak controlling a USB dongle. In the demo, we use a Windows7 PC and dual mode USB dongle (BLE and Classic Bluetooth). Ministak then runs an A2DP/AVRCP connection, an SPP connection and a BLE connection at the same time.
This demo shows Ministak running the A2DP/AVRCP and receiving music from a Smart Phone. The AVRCP is shown with examples o Pause and Play.
This is a demo that shows the BC127 with low latency Audio. Two BC127 development boards are connected and one is streaming Audio to the other one using aptX-Low Latency. The latency measured is 40ms.
This is a short demo showing Ministak running HFP-AG. Ministak is running on a PC under Windows7 and is connecting to a standard headset using HFP-AG.
This Demo is showing 2 x BC127 with a wireless connection and acting as synchronised left and right speakers. This technology in included in BC127 and is also sometimes called True Wireless Stereo.
Ministak 3.0 includes now HFP. The total size of Ministak is now 36kFlash and 4kRAM. This includes HFP, SPP, BLE and IAP. This video shows Ministak in action with HFP working.
Android has released Bluetooth Low Energy with Android 4.3 . So we have here a demo of BC127 connecting to a Nexus 4.0 with Android 4.3 over Bluetooth Low Energy, this is working with BlueCreation Android Melody Smart application available at https://play.google.com/store/apps/details?id=com.bluecreation.melodysmartandroid
This is a short demo showing how Ministak can connect to multiple devices using the Serial Protocol Profile (SPP) and receiving data and echoing back these characters to them. In this demo, we connected Ministak to 3 devices: An Android tablet, an Android phone and a Windows PC. We used the Melody Android Application to show the characters sent and received.
This video is to show how BC127 can access the text messages (SMS) that the iOS device receives . This is done using the MAP profile (Messaging Access Profile).
This is a short demo showing how to use the BC127 to connect to a PC via Bluetooth using the Serial Protocol Profile (SPP). This shows how to search for Bluetooth Devices on the PC, find the BC127 and establish a connection.
This small demo is the discovery board connecting to another BC127 discovery board and streaming music. A very simple way to use BC127 to create a wireless Audio link.
This is the original demo of Ministak running on a TI MSP430 and a CSR8811 Bluetooth chip. It demonstrates a Classic Bluetooth with the Serial Protocol Profile (SPP) and a Bluetooth Low Energy example such as the battery level indicator.
This video shows how to connect to an iPhone application using the BC127 with the BC127-DEVKIT001. The iPhone application can then send/receive text via Bluetooth Low Energy to the module and the module UART interface.
This video shows the setting up of the BC127-DEVKIT001. You can see how the USB enumerates as a COM port and how to communicate using the PC via that COM port and send commands
This video uses a BC127-DEVKIT001 and shows how to connect to an Android Phone application. You will be able to send and receive Data from the application and receive them via the UART on the BC127 module