Shopping Basket

There are currently 0 items in your Shopping Basket.

New Releases

Cambridge 24th September 2015   BlueCreation's advanced Bluetooth Smart and Dual Mode Audio Bluetooth module BC127 and BC118 have today been granted Japan (JRF) and Korea P.R. (KC) certifications.    Liam Arnold, Manager for BlueCreation stated “The BlueCreation team are pleased to now be able to offer these modules in South Korea and Japan. This makes it easier for our customers to sell their successful products using the advanced and innovative features of BC127 and BC118. These products can be for example Audio equipment, Remote Controls, Industrial Equipment, Measuring Systems, iBeacons and other". ....Read more

Firmware Updates

SEARCH
Firmware New Features and Fixes Last Updated    Type
Melody 6.1.1 HD
for BC127-HD only

- include aptX HD codec and 24 bit audio resolution support
- (aptX Low Latency not available)
2017-02-06
20170203_melody_6_1_1_hd_dfu-1486386258.zipZIP (1 MB)
Melody 6.1.1
- HD release available
- Fix HFP audio
- Fix ADVERTISING command (in Beacon mode)
- Add TWS to LIST command profiles
- Fix TWS with line in (ROUTE 1)
- Fix A2DP automatically resume streaming
- Fix aptX audio
- Fix IAP (App launch after connection and remove version sent after data session opened)
2017-02-03
20170203_melody_6_1_1_dfu-1486126260.zipZIP (1 MB)
Melody 6.1.0
- AGHFP 1.7 and HFP 1.7 support
- Max number of connections increased to 3 for AGHFP and A2DP source in PROFILES
- SSRD command updated
- Support iAP multiconnection (2 max)
- IAP_OPEN_SESSION / IAP_CLOSE_SESSION notifications added for the iAP data session
- iAP warnings fixed
2017-01-24
20170124_melody_6_1_0_dfu-1485279711.zipZIP (1 MB)
Melody 6.0.54
- Add audio transfer request for HFP (with CALL command)
- Fix TONES command (sharp/flat notes)
- Fix PIO_3 Audio Enable and A2DP_STREAM notification
- Fix A2DP_STREAM notifications for TWS
- Fix AGHFP (panic when SCO open from HF)
- Fix AUDIO_ANALOG config
- Fix iAP ACK timeout warnings
2017-01-09
20170109_melody_6_0_54_dfu-1483981244.zipZIP (1 MB)
Melody 6.0.53
- Add AUTO_DATA config to enter automatically in data mode for BLE/SPP/iAP links.
- Remove UART flow control check when entering data mode (not recommended to use data mode without flow control).
- Fix VOLUME command when using ROUTE 4 and SPDIF audio input.
- Update ADVERTISING command. Stop advertising not allowed if auto advertising is enabled.
- Allow max BLE MTU value up to 150.
2016-11-04
20161104_melody_6_0_53-1478271701.zipZIP (1 MB)
Melody 6.0.51
- Add CONNECTABLE command.
- Update POWER command with the possibility to turn on/off the Classic Bluetooth and BLE functionalities independently.
- Update STATUS command to return the CONNECTED, CONNECTABLE, DISCOVERABLE and BLE state of Melody.
- Add parameter to disable iAP1 support (in IAP_PARAMS).
- iAP update: reduce UART flush timer to 100ms in data mode.
- BLE fixes (ADVERTISING OFF command and sending data in Central mode).
2016-10-14
20161006_melody_6_0_51_dfu-1476441290.zipZIP (1 MB)
Melody 6.0.50
- Remove BLE database size limitation (BLE_SET_DB). Will return an error if not enough memory is available.
- Fix iAP, last packets not handled.
- iAP data mode: reduce UART flush timer to 500ms.
2016-10-03
20161003_melody_6_0_50_dfu-1475491964.zipZIP (1 MB)
Melody 6.0.49
- Add IAP_PARAMS to set the maximum packet length and maximum number of packet for iAP. (MFI build only)
- Fix iAP data mode transfer
- Fix UART (issue when buffer is full and when switching between operating modes)
- Fix playback issue with Spotify and iPhone
2016-09-27
20160927_melody_6_0_49_dfu-1474996672.zipZIP (1 MB)
Melody 6.0.48
- Add BLE role switching (possibility to switch the BLE role without reset)
- Fix BLE data mode for central devices
- Fix A2DP Source multi-connection
- Fix enter/exit data mode with GPIO_5
- Fix wait time after entering data mode with iAP High Speed
- Fix iAP notifications in command mode
- Fix PB_PULL command with multi-connection
2016-09-02
20160902_melody_6_0_48_dfu-1472833289.zipZIP (1 MB)
Melody 6.0.47
- Add generic BLE functionality in Peripheral mode to support all BLE profiles.
- Update BLE generic commands and notifications (Central and Peripheral mode).
- Add A2DP back channel support
- Update DEEP_SLEEP config (can be changed without reset)
- Add re-sampling 8k to 16k and 16k to 8k for HFP
2016-08-19
20160819_melody_6_0_47_dfu-1471624099.zipZIP (1 MB)
Melody 6.0.46
- Add AVRCP Fast Forward and Rewind
- Update parser to support strings with spaces (SEND command, NAME...)
- Fix iAP config
- Update VOLUME command for ROUTE 1/4
- Fix Volume +/- with ROUTE 1/4
- Update AUDIO_ANALOG codec output gain
2016-08-05
20160805_melody_6_0_46_dfu-1470413639.zipZIP (1 MB)
Melody-WiFi-3.1.1
Version 3.1.1:

Fixes/enhancements

* Fix bug in the http_post functionality.
2016-08-04
melody-wi-fi-3.1.1-1470327131.zipZIP (624 KB)
Melody 6.0.45
-Fix SPDIF output
-Fix SEND_RAW command
-Fix AUDIO_ANALOG input gain
-Fix Speech recognition
-Fix PB_PULL output and PB_ABORT command
-Fix BC_SMART_COMMAND
-Update HID_READ notification
-Update HFP codec status after connection
-Update IAP_APP_REQ to use default protocol not provided as parameter
2016-07-29
20160729_melody_6_0_45_dfu-1469809649.zipZIP (1 MB)
Melody 6.0.44
- Add Bluetooth volume configuration BT_VOL_CONFIG (default volume and number of steps)
- Add balance control config BALANCE (adjust volume left/right)
- Add special cases to ROUTE command and support for Music Manager and tones.
- Update AUDIO_ANALOG configuration (input/output gain range and mic bias)
- Fix PAIR notification for legacy pairing
- Fix INQUIRY command (RSSI and max results parameters)
- Fix APTX Low Latency codec
- Fix BLE (panic when sending data and streaming music, default MTU and BLE/Classic state)
2016-07-15
20160715_melody_6_0_44_dfu-1468593347.zipZIP (1 MB)
BC187 - Melody Wi-Fi Mini Flash Image v1.1
- Added Over-the-air-upgrade support for FW and Script
- Added file system operation
- Added configuration through the Access-Point interface
- Added ability to save HTTP responses to a file
- Changed HTTP replies to not include HTTP headers
2016-07-11
bc187-melody-mini-v1.1-1468252220.zipZIP (584 KB)
Melody-WiFi-3.1.0
Version 3.1.0:

Fixes/enhancements

* Replace "i2s" module for "rtp" at Lua and Script level
* Fully support the I2S audio streaming and playing over RTP on UDP
2016-07-07
melody-wi-fi-3.1.0-1467911683.zipZIP (624 KB)
BC187 - Melody Wi-Fi Mini Flash Image v1.0.0
Initial Release
2016-07-01
melody-wi-fi-mini-1.0.0-1467387177.zipZIP (283 KB)
SmartBond-CodeLess v0.3 Demo
Initial Release
2016-07-01
melodysmart_d_v0.3-demo-1464189036.zipZIP (47 KB)
Melody 6.0.43
- Fix INQUIRY command
- Fix PASSKEY command
- Fix TONE command
2016-06-20
20160620_melody_6_0_43_dfu-1466440976.zipZIP (1015 KB)
Melody 6.0.42
- Fix DFU
2016-06-17
20160617_melody_6_0_42_dfu-1466185504.zipZIP (1011 KB)
Melody-WiFi-2.4.4
- fix wifi_mqtt_susbcribe return code error
- make sure the webapp is part of the image
2016-06-14
melody-wi-fi-2.4.4-1458042569.zipZIP (613 KB)
Melody-WiFi-2.4.3
- fix GPIO behaviour when controlled from the cloud
- remove the wifi_mqtt_start function, now all you need to call is wifi_mqtt_connect
- added a wifi_mqtt_status function
- added a new command for sending raw data (sendb)
2016-06-14
melody-wi-fi-2.4.3-1457617799.zipZIP (608 KB)
Melody 6.0.40
- Add Dual A2DP
- Fix AGHFP audio parameters
- Fix multiconnection issue
- Fix SEND_RAW with SPP
- Add AT commands with AGHFP
- Disable AT commands by default
- Fix BLE connection parameters
2016-06-03
20160603_melody_6_0_40_dfu-1464974278.zipZIP (1011 KB)
Melody 6.0.39
- Fix APTX with TWS
- Update Inquiry command
- Update BLE Advertising Flag
- Add support for AT commands with AGHFP
- Fix HFP/AGHFP multiconnection
- Enable WBS and AT commands by default
2016-05-31
20160531_melody_6_0_39_dfu-1464714089.zipZIP (1011 KB)
MelodySmartKit iOS Sample App v1.0
First release of the sample app for our new MelodySmartKit Swift iOS framework

Setup instructions available on: https://github.com/BlueCreation/MelodySmartKit-Sample-App/blob/master/README.md

Library documentation available on: http://bluecreation.com/docs/MelodySmartKit/index.html
2016-05-24
melodysmartkit-sample-app-master-1464111444.zipZIP (38 KB)
Melody 6.0.38
- Add LINK_POLICY command (configure the power mode)
- Add support for AGHFP and HFP concurrently
- Add CALLER_NUMBER notification for incoming calls
- Fix ROUTE command with AGHFP
- Enable WBS for AGHFP
- Update auto-connection
- Update COD config (0 value accepted)
- Fix audio dropouts with Macbook Pro 10.10.5
- Fix CLASS1 config
- Fix AVRCP Meta data
- Fix TWS disconnection
2016-05-18
20160518_melody_6_0_38_dfu-1463583118.zipZIP (1011 KB)
Melody 6.0.37
- Update AUDIO: possibility to select the interface for the input and output
- Update AUDIO_ANALOG: remove rate parameter
- Update I2S audio atten parameter
- Update DISCOVERABLE config
- Fix GPIO (PIO_0 / PIO_4 connection status)
2016-04-29
20160429_melody_6_0_37_dfu-1461950162.zipZIP (1011 KB)
Melody-WiFi-3.0.0
Version 3.0.0:

New features

* New **net** module which supports:
- multiple TCP Clients and Servers
- multiple UDP Clients and Servers
- multiple MQTT Clients
* In Melody, new names and events since they are under NET_EVT category.
* Support selecting a particular TCP channel to use in transparent mode.
* Network related functions (e.g. **sendb**) support selecting link to work on.

Fixes/enhancements

* Improve stability in MQTT Clients, better error handling.
* Improve websocket performance

Deprecated

* wifi.transparent, wifi.tcp, wifi.udp, wifi.mqtt and its analogous Melody functions
wifi_tcp, wifi_udp, wifi_mqtt and wifi_transparent have been replaced for the new
network functions.
2016-04-26
melody-wi-fi-3.0.0-1461685868.zipZIP (590 KB)
Melody 6.0.36
-Add support for Three Way Calling (CALL TWC)
-Fix MAP connection
-Fix MM_CFG / CVC_CFG commands
-Fix PIO4 config
-Fix iAP High Speed disconnection
2016-04-13
20160413_melody_6_0_36_dfu-1460565220.zipZIP (1014 KB)
Melody 6.0.35
-Fix for TWS reconection issue
2016-04-08
20160408_melody_6_0_35_dfu-1460135088.zipZIP (1013 KB)
Melody-WiFi-2.5.1
Version 2.5.1:

* Support UDP Broadcast in client and server (receive and send)
* MQTT Client: support QoS setting when publishing and subscribing, support Last Will Message, allow user to choose if session should be cleaned or not after disconnection, change interface in already existent publish function, and add a new one.
* Improve stability in TCP/UDP servers
* Fix typos and small bug in documentation's search engine

Version 2.5.0:

* upgrade to new SDK, offering several fixes and improvements
* KNOWN ISSUE with new SDK: HTTPS not working with all hosts configurations. For the moment, avoid upgrading if you must use this feature
2016-04-08
melody-wi-fi-2.5.1-1459877537.zipZIP (625 KB)
Melody 6.0.34
- Add CLASS_1 config
- Update PIO_4 configuration
- Update LINK_LOSS (see Link Loss)
- Update AVRCP_META_DATA (possibility to request AVRCP Meta Data)
- Fix HID issue
- Fix BLE (BC Smart commands)
- Fix iAP Data mode (disconnection)
2016-04-05
20160405_melody_6_0_34_dfu-1459873092.zipZIP (1 MB)
BC188 Cloud Hub v0.4 - Source Code & Binaries
Initial source code release
2016-04-05
bc188-cloud-hub---v.0.4-1459863399.zipZIP (6 MB)
Melody 6.0.33
- Update PIO4 config in GPIO_CONFIG
- Fix SPP disconnection with High Speed feature
-Disable AT commands in Data mode
- Fix iAP Data mode
- Fix SEND_RAW command when the link close before sending the data
- Update DAC gain table with WB codec (fix volume issue)
2016-03-18
20160318_melody_6_0_33_dfu-1458320912.zipZIP (1 MB)
Melody 6.0.32
- Add A2DP streaming state, AG/HFP call state and BLE MTU size to STATUS
- Merge IAP_HIGH_SPEED and SPP_HIGH_SPEED in HIGH_SPEED (no need to reset Melody)
- Merge ENABLE_GPIO_CONTROL and GPIO_ANALOG in GPIO_CONFIG
- Add configuration to raise PIO4 on specific events (in GPIO_CONFIG)
- Change BC_SMART_UUIDS to BC_SMART_CONFIG and add a parameter to disable commands over BLE
- Fix HID disconnection issue in multipoint and add OPEN_ERROR notification when fail to connect
- Update SEND_RAW command to be able to receive notification while the status is PENDING
- Fix issue when transmitting data over BLE and streaming music at the same time (reduce BLE throughput)
- Fix I2S disconnection with A2DP Source
2016-03-12
20160311_melody_6_0_32_dfu-1457791364.zipZIP (1 MB)
Melody 6.0.31
- Exit automatically Data mode when SPP/BLE/iAP connection is closed
- Disable all notifications in Data mode (ROLE...)
- Fix in I2S configuration (Unused values)
2016-03-04
20160304_melody_6_0_31_dfu-1457111337.zipZIP (1 MB)
Melody-WiFi-2.4.1
Version 2.4.1:
==============
- fix TCP server not releasing resources when closed/client disconnects
- fix sending data through the TCP server in non-transparent mode
- fix for a bug when the cloud has disconnected

Version 2.4.0:
==============

Major
^^^^^

* Configuration parameters in Melody Script are immediately persisted. Therefore **config_save** command is removed.
* TCP Transparent is now separated from the Client and Server. Now Client and server can be started independently and
once the user wants to switch to transparent, that command can be issued. When transparent mode is off, TCP Client
and Server can receive data through WIFI_EVTs and send data with commands.

Fixes/enhancements
^^^^^^^^^^^^^^^^^^

* Added support for using external antenna.
* Added wifi.sta.max_conn_retries configuration value to control the amount of connection retries after a NETWORK_NOT_FOUND event.
* Removed recently introduced wifi_tcp_all_start due to the changes in TCP Transparent procedure.
2016-02-26
melody-wi-fi-2.4.1-1456507709.zipZIP (613 KB)
Melody 6.0.30
- Fix volume issue with HFP Narrow band (at 0xD and 0xE)
2016-02-25
20160225_melody_6_0_30_dfu-1456425157.zipZIP (1 MB)
Melody 6.0.29
-Add support for Melody Audio Proximity
-Fix HFP with Narrow band (Stereo output, I2S)
2016-02-19
20160219_melody_6_0_29_dfu-1455902752.zipZIP (1 MB)
Melody 6.0.28
- Fix digital interface with HFP (no CVC / no WBS)
- Small fix (Flow control check, parser issue)
2016-02-12
20160212_melody_6_0_28_dfu-1455301227.zipZIP (1 MB)
Melody-WiFi-2.3.0
Version 2.3:

Major

* Added MQTT client support

Fixes/enhancements
^^^^^^^^^^^^^^^^^^

* Fixed bug in HTTP server that overflowed when receiving requests with very large bodies.
* Accepted ssid and passkey as arguments in wifi_sta_connect
* Removed GPIO.INT type. GPIO.INPUT gpio types can have interrupts triggered now.
* Interrupts can be disabled in an input GPIO by calling gpio_trig with "none". Please read documentation.
* Fixed bugs in TCP Client. Now TCP Transparent mode is disabled automatically if the remote
TCP server goes down (and if there is no local TCP server on).
* Added wifi_tcp_all_start command in order to start both Client and Server if the appropriate configuration parameters are set.
2016-02-12
melody-wi-fi-2.3.0-1455297512.zipZIP (613 KB)
Melody 6.0.27
- Add new filter to INQUIRY command
- Add BLE to SEND_RAW command
- Bug fixes (MUSIC_OLD_AVRCP, WBS with Siri, HID descriptor, BLE data mode)
2016-02-01
20160129_melody_6_0_27_dfu-1454331134.zipZIP (1 MB)
Melody-WiFi-2.2.0
Version 2.2:
Major

Add support for 44 KHz @ 16 bit/sample Stereo I2S streaming and listening via UDP

Fixes/enhancements

Add support for Wi-Fi regions
Support $$$$ as escape sequence from the TCP transparent mode
Fixed bug in WebApp which did not allow to upload the same file twice in a row without refreshing
Now filenames greater than 31 bytes will be truncated when uploaded
2016-02-01
melody-wi-fi-2.2.0-1454325717.zipZIP (608 KB)
Melody 6.0.26
- Bug fixes (AAC codec, TONES command with I2S, HFP volume, AGHFP terminate call)
- Update VOLUME command to be able to change the volumes anytime (even if audio is not streaming for an A2DP link, or if there is no active call for an HFP/AGHGP link...)
2016-01-22
20160122_melody_6_0_26_dfu-1453485065.zipZIP (1 MB)
Melody 6.0.25
-Fix MM_CFG command
-Add support for TWS with analog input (ROUTE 1)
2016-01-15
20160115_melody_6_0_25_dfu-1452880124.zipZIP (1 MB)
Melody-WiFi-2.1.0
2.1.0
------
* Added power management features
* Added text transfer to the Cloud
* Added UDP client and server
* Fixed downloading available upgrade file list from the micro-website
* Show the Cloud connection status on the micro-website

2.0.0
------
* Added support for SSL/TLS.
* Full replacement of '\n' for '\r' in Melody.
* Changed the default UART baud rate to 9600
* Changed the flash layout to support a new OTA mechanism
* Added support for TCP Client and Server.
* Added Serial - TCP Transparent mode.
* Added support for UART Hardware and Software Flow Control.
2016-01-13
melody-wi-fi-2.1.0-1452699757.zipZIP (596 KB)
Melody 6.0.24
-Update battery configuration, fix battery charging
-Update TWS and Music Manager: allow slave to update audio enhancements/EQ
-Add command IAP_APP_REQ (launch iOS app)
-Fix minor bug (BLE auto-advertising)
-Update I2S configuration
2016-01-11
20160111_melody_6_0_24_dfu-1452538415.zipZIP (1 MB)
Melody 6.0.23
-Add Eddystone support
-Add Cap Sense support
-Fix small bugs (PIO 0 high when connected, ROUTE command, Music Manager)
-Update TWS routing (no need to reset anymore)
-Update PAIR command
-Change mic bias (2.6V)
-Change CVC plugin (handsfree)
2015-12-18
20151211_melody_6_0_23_dfu-1450460997.zipZIP (1 MB)
Melody 6.0.22
-Add AVRCP_META_DATA command
-Add SPP_HIGH_SPEED feature
-Add Beacon role (BLE_CONFIG) and BEACON_DATA configuration (only iBeacon for now)
-Small fixes (ROUTE command, exit iAp data mode, number of PBAP connections)
-Update BLE notifications
-Fix TWS audio drop-outs
-Update AVRCP playback status notifications
2015-12-11
20151211_melody_6_0_22_dfu-1449859378.zipZIP (1 MB)
Melody-WiFi-1.3.0
-Firmware Update
-Cloud Initial Release
-Serial to TCP Client feature
-Bug fixes
-Commands need to finish with \r instead of \n
2015-12-09
melody-wi-fi-1.3.0-1449676275.zipZIP (613 KB)
Melody 6.0.21
-Fix Tones
-Fix AUDIO_ANALOG input gain
-Update I2S re-sampling (with A2DP source only)
2015-11-27
20151127_melody_6_0_21_dfu-1448643751.zipZIP (1 MB)
Melody 6.0.20
-Change EOF character ( \r instead of \n )
-Fix several BLE issues
-Update BLE generic commands
-Update SCAN notifications
-Update LICENSE command
-Update CODEC selection
-Fix other minor issues
-Memory optimizations
2015-11-26
20151126_melody_6_0_20_dfu-1448555712.zipZIP (1 MB)
Melody 6.0.18
-Auto connect AVRCP after A2DP
-Add new event notifications
-Fix Audio Enable PIO on non-MFI build
-Add possibility to get the raw data with SCAN command (full advertising packet)
-Add mic bias feature with A2DP
-Use Analog default volume when using the ROUTE command
-Melody becomes discoverable automatically when connecting to an unpaired device
2015-11-16
20151116_melody_6_0_18_dfu-1447671551.zipZIP (1 MB)
Melody 6.0.17
-Fix several BLE, IAP, HFP bugs
-Fix USB host
-Modify default config (PROFILES and VREG_ROLE)
-Auto reset after Restore
-Fix Name command
2015-11-06
20151106_melody-6_0_17_dfu-1446836372.zipZIP (1 MB)
Melody 6.0.16
-add IAP profile
-fix SSRD command
-fix AT command
-fix Name issue
-fix small audio bugs
2015-10-30
20151030_melody-6_0_16_dfu-1446230186.zipZIP (1 MB)
Melody 6.0.15
-Fix Enable Audio PIO (PIO_3)
-Enable mic bias by default (AUDIO_ANALOG)
-Update CLOSE command (possibility to use a device number as parameter)
-Update the battery configuration (see BATT_CONFIG)
2015-10-23
20151023_melody-6_0_15_dfu-1445607180.zipZIP (1 MB)
Melody 6.0.14
-update auto-connection feature (HID, SPP..)
-update SEND command and Data mode
-update audio configuration
2015-10-16
20151016_melody-6_0_14_dfu-1445016903.zipZIP (1 MB)
Melody 6.0.13
-Fix memory issue
-Add Speech Recognition
-Add Melody License
-Add possibility to connect 3 devices in BLE (only central mode)
2015-10-09
20151009_melody-6_0_13_dfu-1444411257.zipZIP (1 MB)
Melody 6.0.12
-add PCM and SPDIFF support
-add possibility to send command over USB
-add new commands (AT, SSRD)
-add new config(REMOTE_ADDR, BLE_CONN_PARAM, BC_SMART_UUIDS SPP_UUID, USB_HOST, MUSIC_AVRP_OLD..)
-fix minor issues (TWS, HFP...)
2015-10-02
20151002_melody-6_0_12_dfu-1443806019.zipZIP (1 MB)
Melody 6.0.11
Fixed A2DP Play/Pause Bug
Fixed Various PBAP/HID/bugs
2015-09-29
20150928_melody-6_0_11_dfu-1443471889.zipZIP (1 MB)
Melody 6.0.10
add HID and MAP profiles and fix bugs
2015-09-25
20150925_melody-6_0_10_dfu-1443203249.zipZIP (1 MB)
Melody 6.0.9 Beta Release
- Fixed a bug that caused the device not to properly disconnect the speakers and mic after an eSCO\SCO connection when not using CVC.
- Minor fixes.
2015-09-21
20150921_melody_6_0_9_dfu-1442854174.zipZIP (488 B)
Melody 6.0.8 Beta Release
-Beta Release of 6.0.8
-New Designs should use 6.x releases
-Please note that if you update to 6.x using the updater, you cannot revert back to a 5.x release.
2015-09-21
20150917_melody-6_0_8_dfu-1442595690.zipZIP (1 MB)
Melody Audio 5.8 RC 3 DFU
Support for downgrading from Melody Audio 6.x
2015-09-21
20150921_melody_5_8_rc3_dfu-1442846034.zipZIP (867 KB)
Melody Audio 5.8 RC 2 DFU
- Ability to use Random Addresses for BLE connections
- Ability to use an older version of AVRCP to disable absolute volume and meta data.
- Ability to set the advertising, scanning and connection parameters for BLE
- Ability to go into discoverable mode when no melody is not connected to any device.
- Fix an issue where enabling only the HID profile can cause a reset.
2015-09-16
20150916_melody_5.8_rc2_dfu-1442414321.zipZIP (870 KB)
Melody Audio 5.8 RC 1 DFU
- AT possibility to send and receive AT command over HFP. HFP profile is still handled by melody, but the application is open to send any AT command directly to the remote device, and it will receive all AT events.
- Fix an Issue with TWS not forwarding audio to second speaker.
2015-07-29
20150729_melody_5.8_rc1_dfu-1438184671.zipZIP (866 KB)
Melody Data 6.0.6 DFU
-High Speed-Data transfers. For MFI licensees, IAP at 740kbit/s+ upload and 550kbit/s download
2015-07-23
20150717_melody_data_6-0-6_dfu-1437387823.zipZIP (511 KB)
Melody Audio 5.7 RC 22 DFU
- Fix an issue where auto advertisment can cause melody to get into an advertising state when it is not advertising
2015-07-21
20150720_melody_5_7_rc22_dfu-1437401219.zipZIP (866 KB)
Melody Audio 6.0.1 DFU
Very early release of Melody 6.0 Audio
-Improved TWS
-Ability to connect 3 devices
-Simplified command set
2015-07-20
20150720_melody-6_0_1_dfu-1437406589.zipZIP (1 MB)
Melody Audio 5.7 RC 21 DFU
- Fix an issue where Linkloss event was not consistent to max_rec config.
- Fix an issue where auto advertisment can cause melody to get into an advertising state when it is not advertising.
- fix an issue where preamp is wired mode is not enabled.
2015-07-15
20150715_melody_5.7_rc21_dfu-1436974894.zipZIP (866 KB)
Melody Audio 5.7 RC 20 DFU
- resolved issue with HID profile
2015-07-03
20150703_melody_5.7_rc20_dfu-1435936706.zipZIP (869 KB)
Melody Audio 5.7 RC 19 DFU
- fix an issue with route 40 not disabling gain and pre amp correctly.
- fix issues with multipoint A2DP routing not working correctly.
2015-06-26
melody_5_7_rc19-1435331811.zipZIP (865 KB)
Melody Audio 5.7 RC 18 DFU
- Correctly enable preamp when cVc is disabled.
2015-06-22
melody_5_7_rc18-1434980228.zipZIP (865 KB)
Melody Audio 5.7 RC 17 DFU
- Resolved A2DP Source problem at non-standard rates
- Limit input gain to 15
2015-06-19
20150619_melody_5_7_rc17_dfu-1434728931.zipZIP (842 KB)
Melody Audio 5.7 RC 16 DFU
- Added ability to control and indicate A2DP media state when AVRCP is not available.
- Resolved issue with boot time configuration restore using PIO 0.
- Tone playback improvements.
2015-06-09
20150609_melody_5_7_rc16_dfu-1433861900.zipZIP (842 KB)
Melody Audio 5.7 RC 15 DFU
Added ability to set scan response data
2015-06-05
20150605_melody_5_7_rc15_dfu-1433508647.zipZIP (842 KB)
Melody Audio 5.7 RC 14 DFU
* Fix to Route command * Improvement to A2DP SRA algorithm * I2S default config change
2015-05-27
20150527_melody_5_7_rc14_dfu-1432724664.zipZIP (842 KB)
Melody Audio 5.7 RC 13 DFU
Resoles issue with INPUT_GAIN parameter not being applied at runtime.
2015-05-20
melody_5_7_rc13_dfu-1432125015.zipZIP (838 KB)
Melody Audio 5.7 RC 12 DFU
Resolves issues with Melody Smart data characterisitc
2015-05-18
melody_5_7_rc12_dfu-1431961569.zipZIP (838 KB)
Melody Audio 5.7 RC 11 DFU
Resolved issues with HID profile; CALL command now accepts any alphanumeric character and '+', '*', '#'; Added BLE_AUTO_ADV config
2015-05-14
20150514_melody_5_7_rc11_dfu-1431617441.zipZIP (838 KB)
Melody Data 6.0.4 DFU
* SEND command now accepts optional profile parameter
2015-04-30
20150430_melody_data_6-0-4-bc-dfu-1430400194.zipZIP (506 KB)
Melody Audio 5.7 RC 10 DFU
* SPP sniff mode improvements and fixes
* Multipoint Source mode automatically swaps streams when Play command is issued for stream
* Fixed CLASSIC ROLE=1 X long press on PIO 2 firmware panic.
* Changes to SPDIF configuration
* Please read MEL-57RC10-MAN-RA for details.
2015-04-29
20150429_melody5_7_rc10_dfu-1430321925.zipZIP (833 KB)
Melody Audio 5.7 RC 8 MFI DFU
Build intended for MFI Licensees only; All changes and fixes included in Melody Audio 5.7 RC 8 + PIO 0 now correctly indicates state connected when using iAP profile only
2015-04-23
melody5_7_rc8_mfi-1429802889.zipZIP (849 KB)
Melody Audio 5.7 RC 8 DFU
* Calling wired route modes twice in a row caused a panic. This has now been resolved, a routing will not be allowed if it is already active;

* PCM interface configuration fixes: PCM interface operates at 16BPS, stereo, bit clock equal to 2*16*Fs, long sync is used with a sync length of 16 bit clocks;

* Issuing AVRCP PLAY from remote device in CLASSIC_ROLE=1 1 now works as expected;

* Microphone bias is now correctly applied for WIRED A routing;

* BLE_AUTO_ADV was sometimes causing a panic due to a race condition. This has been fixed;
2015-04-23
melody5_7_rc8-1429802047.zipZIP (833 KB)
Melody 5.7 RC7
fixes on the Audio side. Update routing command, add command for the Music Manager.
2015-03-26
20150326_melody_5.7_rc7_dfu-1427380066.zipZIP (864 KB)
Melody Smart 3.4.0 OTAU
Available for OTAU from your free BlueCreation MelodySmart iOS or BLE Explorer Android application.

Release note:
- Added ability to send OTA commands from central (CMD) + responses
- Added RCM command to enable/disable Remote Command Mode on the central (and allow/disallow CMD commands
- Added prompt indicating features supported by remote device (FTRS) on central
- PIO control/Mirroring functionality re-factored and simplified
- Removed RPD, RPS, RPN commands and prompts - the ways to control remote PIO states are: PIO Mirroring and OTA Commands
- Changed LPD and LPS commands to take 4 parameters, one for each PIO available, instead of a bitmask
- Changed how PIO Mirroring works. It now requires both sides to have it enabled in order to work
2015-03-19
melody-smart-v3.4.x-usermanual-rev_a-1426782154.pdfPDF (949 KB)
Melody 5.7 RC6
with Fixes on the Audio/Tones side
A2DP Source Multiple connection fix
2015-03-09
20150309_melody_5.7_rc6_dfu-1425918078.zipZIP (858 KB)
Melody 5.7 RC5
Added audio enhancement/Music Manager support
2015-03-05
20150305_melody_5.7_rc5_dfu-1425556055.zipZIP (831 KB)
BC Mesh Android Sample App Source Code - v1.1
- Initial release
2015-03-02
bcmesh-android-src-1.1-1425293469.zipZIP (3 MB)
Melody Android App
First Release
2015-02-18
melodyandroid-app015-lib13-1424254784.zipZIP (6 MB)
Melody 5.7 RC4
Added ability to send commands via USB
2015-02-16
20150216_melody_5.7_rc4_dfu-1424097104.zipZIP (873 KB)
Melody Smart 3.3.0 OTAU
Available for OTAU through your BlueCreation Melody Smart iOS app or BLE Explorer Android app.

Changes since 3.2.2
- Melody Smart Configuration parameters now shown in alphabetical order
- CONP now accepted in format MIN MAX LATENCY TIMEOUT
- Fixed issue with WAKE WLVL configs that was retrieving/storing the wrong value from NVM
- Fixed issue with scanning when ADDR is supplied and CCON and ACON are off
- Fixed issue causing the central to stall when entering transparent mode on connection with TRSE=ON and TRSM=ON
- Fixed issue causing the central not to force bonding when configured to require it
- Fixed issue with default scan parameters applied not matching expected value
- Fixed central stall issue when peripheral stops flow control when in transparent mode
2015-02-13
melody-smart-v3.3.0-usermanual-rev_a-1423843649.pdfPDF (894 KB)
MelodyRecord for Android
- Initial release
2015-02-10
melodyrecordexample-1.0.0-1423574461.zipZIP (127 KB)
Melody 5.7 RC2
With Fixes on the Audio side
2015-02-04
20150203_melody_5.7_rc2_eval_manual-1423054134.zipZIP (2 MB)
Melody 5.7 RC1
Added BLE Commands
2015-02-03
20150203_melody_5.7_rc1_dfu-1422984934.zipZIP (874 KB)
MiniStak HFP Demo for Linux
First Release
2015-02-02
hid_host_demo_linux-1422895432.zipZIP (333 KB)
MelodyRecord for iOS
- Initial release
2015-02-02
melodyrecord-ios-1.0-1422886573.zipZIP (47 KB)
Melody Audio 5.0 RC6 Update
TWS fix
Better Audio control
Several other fixes
Added command for loop back
Auto Power-Up issue fixed
Added command mode
I2S resampling tuned
2015-01-25
20150114_melody5_6_rc6_dfu-1422214360.zipZIP (867 KB)


BLUECREATION LIMITED USE LICENSE AGREEMENT
SOFTWARE DOWNLOADED FROM BLUECREATION WEBSITE

The use of the Deliverables, as defined herein, is exclusively governed by the terms of this limited use license agreement (the “Agreement”), dated and effective as of the Effective Date set forth below, by and between Cambridge Executive Limited (“BlueCreation”), an English Limited company with its principal place of business at St John’s Innovation Centre, Cowley Road, Cambridge, CB40WS, England  and LICENSEE. By downloading, installing or using the Deliverables, Licensee accepts the terms of this Agreement. If Licensee does not agree to all of the terms of this Agreement, then Licensee must not download, install or use the Deliverables. Licensee and BlueCreation are each a “party” and, collectively, are the “parties” to this Agreement. BY SELECTING THE “ACCEPT” OPTION BELOW, LICENSEE SHALL BE DEEMED TO HAVE ACCEPTED AND AGREED TO ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT (“ACCEPTANCE”), AND THIS AGREEMENT SHALL BECOME EFFECTIVE UPON THE DATE OF SUCH ACCEPTANCE BY LICENSEE (THE “EFFECTIVE DATE”). FOR AVOIDANCE OF DOUBT, IT SHALL NOT BE A REQUIREMENT TO THE EFFECTIVENESS AND ENFORCEABILITY OF THIS AGREEMENT THAT BLUECREATION EXECUTE THIS AGREEMENT.

 

1. LIMITED LICENSE.
1.1 License Grant. Subject to Licensee's performance of the terms and conditions of this Agreement, BlueCreation hereby grants to Licensee during the term of this Agreement a non-transferable, non-exclusive, royalty free, world-wide, limited license to use and reproduce and, if required, modify the Deliverables to the extent that source code is provided for: (i) Licensee's internal evaluation in connection with development of Licensee's Product and/or Licensee's Software for use exclusively with BlueCreation's Products, and/or determination of whether or not to place volume purchase orders with BlueCreation for the purchase of BlueCreation's Products; (ii) incorporating the firmware into Licensee's Product and/or Licensee's Software for use exclusively with BlueCreation's Products; and (iii) distributing, and having distributed, the firmware solely as incorporated into Licensee's Product and/or Licensee's Software for use exclusively with BlueCreation's Products.
1.2 License Restrictions. In no event may Licensee (i) use the Deliverables and/or Modifications thereof in conjunction with any product other than Licensee’s Product and/or Licensee’s Software; (ii) distribute, license or sell the Deliverables and/or Modifications thereof as a stand-alone product; (iii) decrypt, disassemble, reverse assemble or reverse compile the Deliverables, except to the extent that such restrictions are prohibited by applicable law; (iv) distribute the source code of the Deliverables and/or Modifications thereof; (v) take any actions that would cause the Deliverables and/or any portion thereof to become subject to the GNU General Public License or any other open source license that imposes any limitation, restriction or condition on the right or ability to use or distribute the Deliverables and/or any portion thereof, (vi) disclose the results of any benchmarking of the Deliverables and/or any portion thereof (whether or not obtained with BlueCreation’s assistance) to third parties; (vii) use the Deliverables and/or any portion thereof to develop or enhance any product that competes with the BlueCreation Product; or (viii) employ the Deliverables and/or any portion thereof in, or in the development of, life critical applications or products or in any other application or product where failure of the Proprietary Deliverables and/or any portion thereof or any results from the use thereof can reasonably be expected to result in personal injury.
1.3 Other License Terms. The Deliverables are licensed, not sold, and are protected by copyright laws. All right, title and interest in and to the Deliverables and any copies thereof, regardless of form or media, shall remain solely with BlueCreation. Except as expressly provided herein, this Agreement does not grant Licensee any rights under any of BlueCreation’s patents, copyrights, trade secrets, trademarks or other Intellectual Property rights. BlueCreation and its third party licensors retain all rights not explicitly granted herein. Licensee agrees that each copy of Licensee’s Software distributed by Licensee will be accompanied by and subject to a software license, the terms and conditions of which shall be at least as protective of the Deliverables and Modifications as the terms and conditions Licensee uses for its own software products and the terms and conditions of this Agreement. Licensee expressly agrees not to distribute Licensee’s Software to any third party that has not accepted the terms of such Licensee software license.
1.4 Bug Fixes, Patches, Workarounds. Licensee agrees to provide BlueCreation with the annotated source code and relevant information and/or documentation for any bug fix, patch, workaround or other such Error correction made by Licensee to the Deliverables. BlueCreation shall own all Intellectual Property rights relating to any bug fixes, patches, workarounds or other such Error corrections made by Licensee to the Deliverables and BlueCreation shall be entitled to use such information for any purpose, including but not limited to for the purposes of this Agreement.
1.5 Ownership of Modifications. Except as provided in Section 1.5, Licensee shall exclusively own Modifications created by Licensee to the Deliverables subject to the underlying ownership rights of BlueCreation. Licensee shall have no obligation to disclose to BlueCreation any such Modifications except as provided in Section 1.5. Upon Licensee’s disclosure to BlueCreation of Modifications created by Licensee to the Deliverables, BlueCreation shall be entitled to use such Modifications for any purpose, including but not limited to for the purposes of this Agreement. Notwithstanding the foregoing, Licensee undertakes to and covenants with BlueCreation that it will not commence or threaten any lawsuit or other proceedings against BlueCreation or its Affiliates or its suppliers, or any of their respective licensees or customers, in any jurisdiction, where such proceedings allege infringement of Licensee’s Intellectual Property rights in the Modifications. No other rights except those expressly stated in this Section 2.5 shall be deemed granted, waived, or received by implication, estoppel or otherwise.
1.6 Audit. During the term of this Agreement (including the period of time set forth in Section 6.2 pertaining to Licensee’s continued use of the Proprietary Deliverables following termination) and for a period of two years thereafter, BlueCreation may appoint an independent third party auditor under an obligation of confidentiality to conduct, at BlueCreation’s expense, an inspection of such of Licensee’s records and practices as are directly related to its use of the Proprietary Deliverables and solely for the purpose of verifying Licensee’s compliance with the terms and conditions of this Agreement. BlueCreation shall exercise this right upon no fewer than sixty (60) days' prior written notice. Licensee will provide reasonable accommodation for the review. BlueCreation shall deliver to Licensee a copy of the results of any such review.

2. CONFIDENTIAL INFORMATION. The receiving party shall not disclose to any third party, or use in any manner not expressly permitted herein, any Confidential Information of the disclosing party. The receiving party agrees to take all reasonable measures to protect the disclosing parties Confidential Information and prevent unauthorized disclosure thereof, which measures shall be at least as stringent as those measures the receiving party takes to protect its own confidential information of like kind. Without in any way limiting the foregoing, the receiving party shall restrict access to the disclosing party’s Confidential Information to its employees and individual third party contractors working on site who have executed a written agreement sufficient to protect the Confidential Information in accordance with the provisions of this Agreement and who have a “need-to-know” to exercise the license rights granted herein. Notwithstanding the above, all Confidential Information, and any documents and other tangible objects containing or representing the Confidential Information, and all copies thereof shall be and remain the property of the disclosing party.

3. DISCLAIMER OF WARRANTIES. 
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE DELIVERABLES AND CONFIDENTIAL INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. BLUECREATION AND ITS SUPPLIERS DISCLAIM ANY WARRANTY OR OBLIGATION TO PROVIDE SUPPORT, UPDATES OR BUG FIXES FOR THE DELIVERABLES OR CONFIDENTIAL INFORMATION. NEITHER BLUECREATION NOR ITS SUPPLIERS MAKE ANY WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY FOR ANY PURPOSES WHAT¬SO¬EVER OF THE DELIVERABLES OR CONFIDENTIAL INFORMATION. NEITHER BLUECREATION NOR ITS SUPPLIERS MAKE ANY WARRANTIES OR REPRESENTATIONS HEREUNDER, WHETHER EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRAN¬TIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, QUIET ENJOYMENT OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

4. LIMITATION OF LIABILITY. IN NO EVENT SHALL BLUECREATION, ITS AFFILIATES OR ANY OF ITS SUPPLIERS HAVE ANY LIABILITY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND BASED ON ANY THEORY OF LIABILITY, WHETHER FOR BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, ARISING OUT OF THIS AGREEMENT OR LICENSEE’S USE OF OR INABILITY TO USE THE DELIVERABLES AND/OR CONFIDENTIAL INFORMATION, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMA¬TION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE COLLECTIVE LIABILITY OF BLUECREATION, ITS AFFILIATES AND ITS SUPPLIERS UNDER THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY LICENSEE TO BLUECREATION HEREUNDER. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. IN JURISDICTIONS THAT PROHIBIT EXCLUSION OF LIABILITY OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATIONS AND EXCLUSIONS MAY BE LIMITED IN THEIR APPLICATION TO LICENSEE AND, DEPENDING ON LOCAL LAW, LICENSEE MAY HAVE OTHER SPECIFIC LEGAL RIGHTS.

5. TERM AND TERMINATION.
6.1 The licenses granted hereunder are perpetual unless terminated as specified in this Section
6.1. Licensee may terminate this Agreement at any time upon the provision of written notice to BlueCreation. Without prejudice to any other right or remedy which may be available to it, BlueCreation shall be entitled to terminate this Agreement immediately if Licensee: (i) ceases the development, commercialization and/or support of Licensee’s Product and/or Licensee’s Software; (ii) commits a material breach of any term hereof that is incapable of cure, including but not limited to an assignment or attempted assignment in violation of Section 7.1 hereof, and/or a material breach of any term hereof that is capable of cure but remains uncured thirty (30) days after notice from BlueCreation to Licensee of the existence of such breach; (iii) makes any voluntary arrangement with its creditors for the general settlement of its debts or becomes subject to the supervision of a bankruptcy tribunal; and/or (iv) has an order made against it, or passes a resolution, for its winding-up or has a lien holder take possession or has a receiver or similar officer appointed over all or substantially all of its property or assets.
6.2 Upon termination of this Agreement for any reason, Licensee agrees to immediately cease use of, and to return or destroy, at BlueCreation’s sole option, the Deliverables, all Modifications thereof, and any other Confidential Information of BlueCreation in Licensee’s possession, custody or control, together with all copies and merged portions in any form, including but not limited to deletion of the foregoing from Licensee’s computers, and to certify such return or destruction in writing. Notwithstanding the above, Licensee may retain one copy of the Proprietary Deliverables solely for the limited purpose of supporting Licensee customers who received a Licensee Product that was manufactured prior to the termination date of this Agreement. Notwithstanding anything to the contrary contained herein, Sections 1.1, 1.4, 1.5, 1.6, 1.7 and 2 through 8 shall survive any termination of this Agreement.

7. MISCELLANEOUS.
7.1 Licensee shall not assign or otherwise transfer this Agreement or any of its rights and obligations hereunder, whether in whole or in part, including by operation of law, without the prior written consent of an authorized signatory of BlueCreation. This Agreement will bind and inure to the benefit of the parties and any permitted successors and assigns.
7.2 Licensee hereby acknowledges that its breach of this Agreement may cause irreparable harm and significant injury to BlueCreation in an amount that may be difficult to ascertain and for which a remedy at law may be inadequate. Accordingly, Licensee agrees that, in addition to any other rights and remedies it may have, BlueCreation shall have the right to seek injunctive relief in any court of competent jurisdiction to enforce Licensee’s obligations under this Agreement.
7.3 This Agreement shall be governed by English law and the parties submit to the non-exclusive jurisdiction of the Courts of England for the purpose of hearing and determining any legal dispute arising out of this Agreement.
7.4 When any notice is required or authorized hereunder, such notice shall be given in writing by recognized delivery service or personal delivery addressed to the other party. Notices shall be sent to Licensee at the address set forth in the signature block of this Agreement and to BlueCreation at the address set forth in the introductory paragraph of this Agreement. Either party may change the address for notice hereunder by providing the other party with ten (10) days written notice thereof.
7.5 The original of this Agreement has been written in the English language, and the governing language of this Agreement shall be English. Licensee hereby waives and agrees not to assert any right to have this Agreement written in the language of Licensee’s place of residence if other than English.
7.6 A waiver of any default hereunder or of any of the terms or conditions of this Agreement shall not be deemed to be a continuing waiver or a waiver of any other default or of any other term or condition, but shall apply solely to the instance to which such waiver is directed. The exercise of any right or remedy provided in this Agreement shall be without prejudice to the right to exercise any other right or remedy provided by law or equity, except as expressly limited by this Agreement.
7.7 In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions shall not in any way be affected or impaired, and a valid, legal and enforceable provision of similar intent and effect shall be substituted for such invalid, illegal or unenforceable provision.
7.8 This Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof, and supersedes and terminates all other prior and/or contemporaneous verbal and/or written agreements and understandings with respect thereto. No modifications to this Agreement shall be enforceable except when in writing and signed by an authorized signatory of each party. For the avoidance of any doubt, the parties expressly agree that any license terms which may be presented to a Licensee employee in the course of his or her access to or use of the BlueCreation Extranet (including where the Licensee employee is required to indicate his or her acceptance or acknowledgement of such license terms as a condition of such access or use) shall be void and of no force and effect to the extent that they relate to the Proprietary Deliverables, and shall not under any circumstances be deemed to modify or amend any of the terms and conditions of this Agreement.
8. DEFINITIONS.

8.1 “Affiliate” means a corporation or other entity that directly, or indirectly through one or more intermediaries, controls, or is controlled by, or is under common control with, a party hereto (with “control” meaning ownership of more than fifty percent (50%) of the voting stock of the entity or, in the case of a non-corporate entity, an equivalent interest), that is not a competitor of BlueCreation with respect to the BlueCreation Product.

8.2 “Confidential Information” includes (i) the Deliverables and any portions, components or sub-files thereof; (ii) the structure, sequence and organization of the Proprietary Deliverables, and the concepts, methods of operations and ideas disclosed therein; (iii) any trade secrets relating to the Proprietary Deliverables and/or the BlueCreation Product; (iv) the terms and conditions of this Agreement; and (v) other information disclosed between the parties that a reasonable person would consider to be proprietary based upon nature of the information disclosed and/or the circumstances surrounding its disclosure. Confidential Information shall not include any portion of the Confidential Information which such party can demonstrate: (a) is in the public domain at or subsequent to the time such portion was disclosed to it through no fault of its own; (b) is rightfully in its possession free of any obligation of confidence at or subsequent to the time such portion was disclosed to it by the disclosing party; (c) is developed by its own employees independent of and without reference to any information disclosed to it by the disclosing party; or (d) is disclosed pursuant to the order of any court of competent jurisdiction, or any order of any government agency; provided, however, that either party shall provide prompt prior written notice thereof to the other party to enable such other party to seek a protective order or otherwise prevent such disclosure.
8.3 “Deliverables” means the firmware that is downloaded which includes the Proprietary Deliverables and/or Code Deliverables, together with any associated documentation and materials, in any form or media, provided by BlueCreation to Licensee pursuant to this Agreement.
8.4 “Error" means a defect or nonconformance which causes a Proprietary Deliverable not to perform substantially in accordance with BlueCreation documentation.
8.5 “Intellectual Property” means any patents, patent rights, trademarks, service marks, registered designs, topography and semiconductor mask work rights, applications for any of the foregoing, copyrights, know-how, unregistered design rights, trade secrets and any other similar protected rights in any country.
8.6 “Licensee’s Product” means a product, component, or technology developed by or on behalf of Licensee which incorporates the BlueCreation Product.
8.7 “Licensee’s Software” means a Licensee software product, component or technology which integrates the Deliverables and/or Modifications, is incorporated into Licensee’s Product or distributed for use solely with Licensee’s Product, and is operable exclusively with the BlueCreation Product.
8.8 “BlueCreation Product” means any BlueCreation module controller and other Intellectual Property of BlueCreation or a BlueCreation Affiliate disclosed to Licensee under this Agreement.
8.9 “Modifications” means, in relation to a Deliverable, any modification, adaptation, enhancement, new version, upgrade, translation, improvement or development of such Deliverable which is created by either party. 

Agree to Terms and Condition